Choose your tool
No tools match your search.
Countersink Axial Depth Calculator
Online countersink axial depth calculator. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
Your results will appear here.
Three steps. That’s it.
A useful toolkit for text, data, images and calculations.
- 01
Add your input
Choose a tool, enter values or select a file.
- 02
Make it yours
Adjust the options and run the action.
- 03
Take the result
Copy the result or download its file.
countersink axial depth calculator online
Use countersink axial depth calculator online for mouth diameter mm, hole diameter mm, included angle deg. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
How to use it
Enter mouth diameter mm. Set hole diameter mm, included angle deg. Select Calculate and check the labeled output. Copy or download the JSON result.
Options and example settings
Calculation method
depth_mm = positive(mouth_diameter_mm-hole_diameter_mm)/(2*tand(range(included_angle_deg,1,179)/2)) (^ means exponentiation; trig functions ending in d use degrees).
Worked examples
Apply countersink axial depth calculator to the case below, keeping the displayed units and assumptions. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
Countersink Axial Depth Calculator — worked case
Settings: hole diameter mm: 6; included angle deg: 90
Input:
12
Calculated result for these inputs:
Output:
{
"depth_mm": 3.0000000000000004
}Choose the right tool
Use cutting data suitable for the actual tool and material. Effective diameter, engagement and chip thickness affect the applicable formulas. Cycle estimates do not generate machine-ready instructions or validate safe operation.
Limitations and common mistakes
- Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
- Use the displayed unit in every field. Ratios and percentages are different inputs; percent fields use values such as 25 rather than 0.25.
Frequently asked questions
How can I use countersink axial depth calculator online?
Enter mouth diameter mm. Set hole diameter mm, included angle deg. Select Calculate and check the labeled output. Copy or download the JSON result.
Where is my input processed?
The bundled tool processes input in your browser. It does not upload tool input to a conversion service. Other site plugins, analytics, advertising and browser extensions may have separate behavior.
Useful next tools
Explore other tools
Open a tool below, use the search, or choose a category to browse its full collection.
- Milling Table Feed from Chip Load
Online milling table feed from chip load. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
- Peck Drilling Cycle Time Estimate
Online peck drilling cycle time estimate. Supplied fixed overhead per intermediate peck; controller motion details excluded.
- Turning Roughing Pass Count
Online turning roughing pass count. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
- Milling Material Removal Rate
Online milling material removal rate. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.
- Milling Cutting Power Estimate
Online milling cutting power estimate. Specific cutting force must match the material and chip conditions.
- Constant RPM Turning Traverse Time
Online constant rpm turning traverse time. Ideal machining arithmetic. Supplied cutting data are illustrative, and tool limits, workholding, machine protection and real cycle behavior require independent review.